Cosmos Forum
Cosmoneer Proto => Structures & Mechanical => : Cosmoneer April 27, 2017, 03:24:02 PM
-
Hi all!
Now that we have obtained a small scale injection machine, we wanted to list some of the areas of improvement or areas we wanted to reduce complexity/cost while adding to the integrity of the Cosmoneer.
Targeted Areas of Improvement
- Front PCB attachment points/methods
- Receiver Coil & support
- Rear PCB attachment points
- Counterweight attachment point
Easy Injection Convertible Parts
- Support Feet
- Front Legs
- Thread Spool
- Coil Cover
Large Injector needed
- Upper & Lower Support Arms
- Main Stand Support Plate
- Dash/Gyro Support
- Inner Hanger
Any ideas or suggestions you have on these items? Leave a post!